Introduction :

“Additive 5118 P & P” – a defoamer is useful in Kraft pulp stock, sulfite stock, screen room, bleach plant area and the like. “Additive 5118 P & P” is highly Active & Effective Defoamer. It is Non-silicone Defoamer based on Mineral Oil and Hydrophobic Surfactant. It is found to enhance quick "knock-down" of foam, particularly in high temperature applications. It not only burst the Foams but controls re-generation of Foam. This Product is APEO Free

Application :

It may be injected directly into a line feeding the washer showers, suitably the first or second stage showers. If added to the second stage showers, a major portion of the defoamer will be carried by the second stage filtrate to the first stage showers to control foaming of the hot, relatively concentrated black liquor in the first stage washer. The remaining defoamer will be carried with the pulp to subsequent washing and screening stages, and will remain effective to prevent the formation of excessive foam in the later stages.

Introduction :

Add-Eco 5514P&P – a defoamer is useful in Kraft pulp stock, sulfite stock, screen room, bleach plant area and the like. “Additive 5514P&P” is highly Active & Effective Defoamer. It is an emulsion of Silicone Oil with blend of proprietary surfactants. The silicone oil is found to enhance quick "knock-down" of foam, particularly in high temperature applications. It not only burst the Foams but controls re-generation of Foam. This Product is APEO Free

Technical Data :

Application :

It may be injected directly into a line feeding the washer showers, suitably the first or second stage showers. If added to the second stage showers, a major portion of the defoamer will be carried by the second stage filtrate to the first stage showers to control foaming of the hot, relatively concentrated black liquor in the first stage washer. The remaining defoamer will be carried with the pulp to subsequent washing and screening stages, and will remain effective to prevent the formation of excessive foam in the later stages.

We offer special foam control technology for Phospheric Acid manufacturing Process which not only burst the Foams but controls re-generation of Foam also .

Introduction :

Phosphoric Acid, is resultant product of reaction between phosphate rock with Sulphuric Acid at elevated temperatures, generally above 70°C. The reactions involved in this "wet process" synthesis of phosphoric acid evolve large volumes of gases resulting in the development of substantial amount of foam.

Adverse Effects caused due to Foaming :

IThe foam produced hinders the react ion process by reducing the capacity of the Equipment .

It may result in overflows of foam which can create dangerous conditions for plant personnel because of the caustic properties of phosphoric acid.

Addition of “Additive 4266” defoams the medium effectively.

Technical Data :

Product is APEO Free